Prolimatech Megahalems Rev B. Intel CPU Heatsink (LGA 775/1156 / 1366) (AM2/2+/3 Mounting Kit Required)

You looking to find the "Prolimatech Megahalems Rev B. Intel CPU Heatsink (LGA 775/1156 / 1366) (AM2/2+/3 Mounting Kit Required)" Good news! You can purchase Prolimatech Megahalems Rev B. Intel CPU Heatsink (LGA 775/1156 / 1366) (AM2/2+/3 Mounting Kit Required) with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

   

Product Feature

• Minimal air resistance between fins allowing best balance between noise and performance in range of 800-1200RPM
• Heatpipes are lined up in a straight line to prevent air back draft allowing air to easily pass through the heatsink body
• Wide fins with mathematically calculated thickness to maximize best air-to-surface cooling rate
• Uniquely designed, easy-to-install socket 775 and 1366 retention mechanism to increase cooling ability. Separate ARM-02 Mounting Kit required for use with AM2 AM2+ and AM3 Motherboards
• Easy to apply, high grade thermal compound, a perfect sidekick to all Prolimatech heatsinks

Product Description

The revised Prolimatech Megahalems Rev B. Intel CPU Heatsink now comes LGA 1156 ready and contains 2 sets of wire fan clips for optimal performance out of the box. Due to the originals very high praise from multiple review sites as well as winning the Editor's Choice Gold Award from [H]ard|OCP Enthusiast this cooler is sure to please. When it comes to air cooling this cooler cannot be beat! This heatsink has been carefully engineered for low to medium speed 120 mm fans producing around 57 CFM - fans in this range are quiet at under 26 dBA - but this heatsink still cools better than the competition! Six heatpipes pull heat up to the fins and away from the CPU. The heatsink ships ready to mount to either Socket LGA 775 or the latest Socket LGA 1366 and LGA 1156! **Sockets AM2, AM2+ and AM3 require optional retention hardware The tower type coolers have been the mainstream in the CPU cooling market for quite some time now, but upon closer inspection you start to notice that designs and engineering can only go so far as they slowly come to a bottleneck. After a while they all start to look the same with performance not worth popping the champaign. This is where Prolimatech comes in. We are here to challenge all possible odds and stray away from the norm. With that focus in mind comes the new Megahalems, tower CPU cooler. Never before seen are the new lows in temperature produced by an intelligent design of low air flow resistance with unmatched performance to boost; perfect for the true overclockers in all of us **PLEASE MEASURE YOUR CASE TO INSURE THIS HEATSINK WILL FIT BEFORE PURCHASING!! WILL NOT ACCEPT RETURNS UNLESS ITEM IS DEFECTIVE!**

Prolimatech Megahalems Rev B. Intel CPU Heatsink (LGA 775/1156 / 1366) (AM2/2+/3 Mounting Kit Required) Review

It's big. Almost big enough I gave it a 4 star review, but it works so well I couldn't subtract any points from this. I have an i7-920 on an Intel DX58SO motherboard, and I've got tall Corsair Dominator memory sticks. Because of the tall heatsinks on the Corsair RAM, I had to orient the heatsink in the non-classic direction. (It's blowing air from my video card down towards my power supply, as opposed to blowing from front of case towards back of case.) It didn't seem to affect performance. My idle temps dropped from 50C to 36C (122F to 97F). My fully loaded temps dropped from 77C to 60C (171F to 140F). Highly recommended unless you have a little case or its too packed in there.

Most of the consumer Reviews tell that the "Prolimatech Megahalems Rev B. Intel CPU Heatsink (LGA 775/1156 / 1366) (AM2/2+/3 Mounting Kit Required)" are high quality item. You can read each testimony from consumers to find out cons and pros from Prolimatech Megahalems Rev B. Intel CPU Heatsink (LGA 775/1156 / 1366) (AM2/2+/3 Mounting Kit Required) ...