Supermicro Server Barebone System (SYS-5017C-URF)

You looking to find the "Supermicro Server Barebone System (SYS-5017C-URF)" Good news! You can purchase Supermicro Server Barebone System (SYS-5017C-URF) with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $932.14    

Product Feature

• Processor: LGA1155 Supports Intel Xeon E3-1200 & v2 Series Processors/Supports Intel 2nd/3rd Gen Core i3/Pentium/Celeron Processors
• Chipset: Intel C216 PCH
• Memory: 4x 240pin DDR3-1600/1333/1066/800 DIMM Slots Supports up to 32GB ECC/Buffered Memory
• Slots: 1x PCI-Express 3.0 x16 Slot, 2x PCI-Express 2.0 x8 Slots (run at x4, UIO)
• SATA: 2x SATA3 Ports, 6x SATA2 Ports, Support RAID 0, 1, 5, 10
• Drive Bays: 4x 3.5" Hot-swap SATA2 HDDs w/ RAID
• Ports: 4x USB 3.0 Ports (via headers), 4x USB 2.0 Ports (2 rear,?2?via header), 1x VGA Port, 2x Serial Ports (1 rear,?1 via header), 2x RJ45 LAN Ports, 1x RJ45 Dedicated IPMI LAN Port
• Power Supply: 500W 80 Plus Platinum Certified High-efficiency (94+%) Power Supply w/ PMBus

Product Description

Supermicro SuperServer 5017C-URF Barebone System - 1U Rack-mountable - Intel C216 Chipset - Socket H2 LGA-1155 - 1 x Processor Support - Black SYS-5017C-URF Barebone Systems

Supermicro Server Barebone System (SYS-5017C-URF) Review

This is a very well-built chassis and while not what a "normal" person would call quiet, it is the quietest 1U server I have used. There are P4-era servers in my rack that are louder in the power-off standby state than this is while running at full fan speed.

It includes both power cords and all the screws you might need to install drives, plus a large assortment of other screws which must serve a purpose for someone. The rails are really well made (and simple, which is a feature) and there is a 2nd set included for shorter racks as well as some adapters to help fitting various configurations.
It is part of the 'flexible IO' series of servers (I think that's what the U in the name stands for) so it uses a SFF-8087 (mini-sas 4i) -> 4x SAS/SATA cable to connect to the backplane. If you are going to use the onboard SATA ports you will need to run your own (longish) cables in place of this. In that case you should perhaps consider the SYS-5017C-MTRF version with the C202 chipset and 1 PCI-E full height slot, which is configured that way by default. If you are installing a SAS controller, you can just plug in the single connector and be on your way.

There are a couple info sheets included, but you should download the PDF manual from SuperMicro for all the details.

Most of the consumer Reviews tell that the "Supermicro Server Barebone System (SYS-5017C-URF)" are high quality item. You can read each testimony from consumers to find out cons and pros from Supermicro Server Barebone System (SYS-5017C-URF) ...